Current position:Home>>Products>>Gate valve>>Soft seal Gate valve>>Resilient Gate valve

Resilient Gate valve

Email:sales@qyv-tech.comTEL:+86-21-39507092 FAX:+86-21-62954830
PRODUCT SEACH:

Resilient Gate valve
Product Sort:Gate valve>>Soft seal Gate valve
Pressure:1.0-1.6MPa
Size:DN50-DN600
Design Std:API, DIN, BS, GB, ASME, ANIS
Product Material:Cast Iron,Ductile Cast Iron,Cast Steel, Stainless Steel
page keywords:Soft seal gate valve, Resilient Gate valve, Gate Valve

Resilient Gate valve infomation:

Model: Z45X

Gate valve, Resilient gate valve, soft seal(Resilient seat)

Flange Connection, non-rising stem.

Model		Z45X-10	Z45X-16
Working pressure(MPa)		1.0	1.6
Suitable temperature( Centi degree)		<=80
Suitable Medium		Water
Material	Body, Bonnet	Grey cast iron
	Disc	Cast Iron+ NBR
	Stem	Stainless Steel
	Seal	Body:Body seal, Disc: NBR
	Packing	NBR

Product introduction:The valve disc is rubber-packed to get excellent sealing effect by the rubber's resilient deformation.Non-rising resilient seated gate valve solves the problem in general gate valve such as leakage,rusting etc. and saves installation space.It is widely used in tap water in dustry,sewage treatment,shipping,construction,petroleum,chemicals,food,pharmacy,textile,electric power,metallurgy and energy system's pipeline to adjust and shut off fluid.

Main material of resilient gate valve:

Serial no.	part	material
1	Body	Grey cast iron,ductile cast iron,cast steel
2	Disc	Ductile cast iron packed with rubber or EDPM outside
3	Bolt	Carbonized treatment
4	Gasket	Buna-N rubber or EDPM
5	Cover	Grey cast iron,ductile cast iron,cast steel
6	Stem	tainless steel
7	O-ring	Buna-N rubber or EPDM
8	Thrust bearing	Gunmetals
9	Bolt	Stainless steel
10	Gland	ductile cast iron,cast steel
11	Dust proof gasket	Buna-N rubber
12	Handwheel(transmission cap)	Cast iron

Main performance standard of Resilient gate valve:

Nominal pressure: 1.0-2.5MPa

Working temp.:0-120Flanged end:GB/T17241.6 GB9113
Nominal diameter: 50-400mm Service:water,oils,gas etc..

Inspection and test standard:GB 13927 , API 598

Main dimensions unit:mm

DN	50	65	80	100	125	150	200	250	300	350	400	450	500	600
L	178	190	203	229	254	267	292	330	356	381	406	432	457	508
Hmin(full close)	313	332	372	424	497	562	680	837	948	1010	1220	1280	1480	1665
Hmax(full open)	355	375	415	476	540	600	720	875	990	1050	1245	1310	1560	1750

At this page you can see the basic data of Resilient Gate valve the picture of Resilient Gate valve ,the detail explanation and mounting dimensions . If you have any inquiry,please send the offer by email to sales@qyv-tech.com,or leave message on the MSN without hesitate.

Current position:Home>>Products>>Gate valve>>Soft seal Gate valve>>Resilient Gate valve

Resilient Gate valve

Product List