Current position:Home>>Products>>Globe valve>>Plunger globe valve
Plunger globe valve
Plunger-type valve: This form of cut-off valve is a conventional variable valve type. In the valve, the valve flap and valve seat are usually designed based on the plunger principle. Polished into a valve stem connected with the plunger, sealed by sets of two in the plunger to achieve a flexible ring. Two flexible sealing rings with a separate, and imposed by the valve cover nut covered with the load in the valve plunger to press firmly around the ring. Flexible ring can be replaced, can be used a wide range of material, mainly used in the valve "open" or "off", but with a special plunger or special forms of the rings, can also be used to adjust flow.
Plunger globe valve
Product Sort:Globe valve>>Plunger globe valve
Pressure:1.6~16MPa
Size:DN15~400mm
Design Std:GB12233-89,12235-89
Product Material:WCB,A105,304,316,316L,CF8C,CF8,CF8M, CF3, CF3M
Product Sort:Globe valve>>Plunger globe valve
Pressure:1.6~16MPa
Size:DN15~400mm
Design Std:GB12233-89,12235-89
Product Material:WCB,A105,304,316,316L,CF8C,CF8,CF8M, CF3, CF3M
