Current position:Home>>Products>>Sluice gate>>Other>>Manual spiral sluice gate
Manual spiral sluice gate
- Email:qyv3@valvesuppliers.cn TEL:+86-577-66992773 FAX:+86-577-66992771
Manual spiral sluice gate
Product Sort:Sluice gate>>Other
Pressure:0กซ6.4Mpa
Size:50กซ500mm
Design Std:GB,JIS,DIN,ANSI
Product Material:carbon steel,stainless steel,cast iron
page keywords:Manual spiral sluice gate
Product Sort:Sluice gate>>Other
Pressure:0กซ6.4Mpa
Size:50กซ500mm
Design Std:GB,JIS,DIN,ANSI
Product Material:carbon steel,stainless steel,cast iron
page keywords:Manual spiral sluice gate
Manual spiral sluice gate infomation:
Products: ZM - 7-7
Product size: 50-500mm
Product pressure: 0 ~ 6.4 Mpa
The products material: carbon steel stainless steel
Manual spiral sluice gate's detailed introduction
Spiral gate main use:
Manual spiral gate is a powder and grain materials, particulate matter and the small volume of material throughput of the main control equipment, widely used in mining, food industry etc control the rapid flow changes or cut off (material than 50) in diameter.
Main technical parameters and properties:
Nominal size: 200 x 200 - - 700 x 700
Applicable temperature: - 10 ~ + 200 กใ c
Connecting flange: GB/T9113, JB/T79
Main material: Q235A, 304, 316, 304L, 316L
Seal hard sealing, soft seal:
Supporting annex: installation flange
At this page you can see the basic data of Manual spiral sluice gate the picture of Manual spiral sluice gate ,the detail explanation and mounting dimensions .
If you have any inquiry,please send the offer by email to sales@valvemanufacture.cn,or leave message on the MSN without hesitate.
Related Products:
